How to Get Out of Xiaomi Fastboot Without Power Button

Xiaomi is known as one of the smartphone brands that offers high performance at an affordable price. However, it is not uncommon for users to experience problems, one of which is that the device enters fastboot mode, and the power button does not work. Then, how to get out of Xiaomi fastboot without using the power button? This article will review some solutions that you can try, from letting the battery run out to using the help of ADB software.

What is Fastboot?

Before discussing how to get out of Xiaomi fastboot, it’s a good idea to first understand what fastboot mode is. Fastboot is a special mode on Android devices that allows users to make system changes, install software updates, or flash new firmware. This mode is usually used by users who want to do custom ROM, rooting, or system update.

However, the problem occurred when the Xiaomi phone could not exit Fastboot mode. One of the main causes is a broken power button, so you can’t use the standard method to get out of this mode.

Why can Xiaomi enter fastboot mode?

There are several reasons why your Xiaomi phone can suddenly enter fastboot mode:

1. The pressure of the power button by accident: The pressure on the power and volume down buttons can simultaneously trigger fastboot mode.
2. bug on the system: Error on the operating system can also make the device go to Fastboot by accident.
3. Rooting or flashing failed: When the user tries to root or flash the system, a process failure can cause the device to enter fastboot mode.

To exit this fastboot mode, you usually only need to press the power button for a few seconds. However, if your power button is broken, you need to try another way that will be discussed in this article.

1. Waiting for the battery to run out and turn itself off

One of the simplest solutions to get out of Xiaomi fastboot without a power button is to let the battery run out. When the phone battery runs out completely, the device will turn off by itself. After that, you can charge and restart the device normally.

PROCEDURE:

1. Leave the phone in fastboot mode: Do not try to press any button. Just leave the device in fastboot mode.
2. Wait until the battery runs out: The time required for the battery to run out depends on the capacity and condition of the battery. This can take several hours to a full day.
3. Charge after death: After the device is turned off due to running out of battery, plug in the charger to charge.
4. Restart the phone: Usually the phone will automatically exit fastboot mode after the battery is recharged and the device is turned on.

Although this method is easy, there are drawbacks if you are in a hurry to use the phone. This process takes quite a long time and does not provide an instant solution.

For other solutions related to the problem of the broken power button, you can check our article at Xiaomi’s powerful solution on/off is not working.

2. Disassemble the backdoor casing of the xiaomi cellphone and unplug the flexi power cable

If you are more courageous and have technical skills, disassembling the back casing of a Xiaomi phone and unplugging the Flexi Power cable can be a solution. However, this method requires caution, as wrong steps can damage other components in the device.

PROCEDURE:

1. Prepare equipment: To do the disassembly, you need a casing opening tool such as a spudger or plastic opening tool, as well as a small screwdriver.
2. Turn off the phone: If the phone is still in fastboot mode, the first step is to turn off the phone manually by removing the internal battery.
3. Disassemble the back casing: Use the opening tool to slowly open the back of the phone case. Pay attention to the position of the plastic clip that locks the case so it doesn’t break.
4. Find Flexi Power Cable: After the casing is open, look for the Flexi cable connected to the power button. This is the cable that sends the signal from the power button to the motherboard.
5. Unplug and reinstall the flexi cable: Unplug the flexi power cable from the slot, wait a while, then plug it back in.
6. Reinstall the case: After the flexi cable is re-installed, close the casing carefully and make sure all the clips are locked properly.
7. Charge and turn on the phone: After everything is reinstalled, charge the phone if necessary and try to turn it back on.

This method can be faster than waiting for the battery to run out, but caution is needed in the disassembly process.

3. Exit Xiaomi Fastboot with ADB (Android Debug Bridge)

If you don’t want to disassemble the device or wait for the battery to run out, the most effective and fast way is to use ADB software. ADB (Android Debug Bridge) is a tool used by developers to communicate with Android devices via a computer. Using ADB, you can order the device to exit Fastboot mode without having to use any physical buttons.

Steps to use ADB:

1. Install ADB on Computer: If you have not installed ADB, you can download it from the official Android Developer website. Extract files into easily accessible folders, such as desktops.
2. Enable USB Debugging Mode on Phone: Before the phone enters fastboot mode, make sure you have enabled the “USB Debugging” option in the device developer menu.
3. Connect the phone to the computer: Use a compatible USB cable to connect your Xiaomi phone to a computer.
4. Open Command Prompt or Terminal: On the computer, open the Command Prompt (Windows) or Terminal (Mac/Linux) and navigate to the folder where ADB is installed. You can do this by typing compact disc followed by the ADB folder address.
5. Check device connection: To make sure the device is connected properly, type the following command:

   ADB Devices
   

   If your device appears in the list, it means it is connected.

6. Exit Fastboot: After the device is connected, type the following command to exit fastboot mode:

   Fastboot reboot
   

   This command will automatically reboot the device and remove it from fastboot mode.

Advantages of ADB

Using ADB has many advantages. First, you don’t have to open the case or wait for the battery to run out. Second, ADB can be used to fix various other problems on Android devices. For example, when a device is stuck in bootloop, you can use ADB to re-flash the system.

However, this method requires computer access and basic knowledge about the use of a command prompt or terminal. For lay users, it may be necessary to learn more about how ADB works before trying this method.

Conclusion

Exiting the Xiaomi fastboot without a power button can indeed be a challenge, but that doesn’t mean there is no solution. From starting to let the battery run out, disassemble the case, to using ADB software, all these methods can help you solve the problem without having to repair a broken power button.

For those of you who prefer a solution without opening the device or waiting for a long time, using ADB is the best and most effective way. However, if you don’t have access to a computer or feel uncomfortable using software, methods such as waiting for the battery to run out or dismantling the case can also be an alternative.

Remember, each method has its own risks and advantages. Choose the method that best suits your situation and expertise. If the problem persists or the phone does not respond after trying all of the above methods, it is worth contacting the nearest Xiaomi service center.