Can the automatic motor run by pushing?
the cause of the automatic motor breaking down and how to overcome it
Automatic motorcycles are currently the main choice for many riders because of their comfort and ease of use. However, like other vehicles, automatic motorcycles are also not free from technical problems, one of which is a breakdown. When the automatic motorbike breaks down, many motorists are confused about how to turn it back on. One way that is often tried is to push the motor like a manual motor. Is this method effective?
Why can an automatic motor break down?
The automatic motor has a different drive system than the manual motor, which uses a CVT (Continuous Variable Transmission) system that does not require a clutch. Although easier to use, some technical problems can still occur and cause the motor to break down.
Some common causes of breaking down on automatic motors include problems with ignition systems, weak batteries, or exhausted fuel. Damage to the engine parts such as spark plugs, batteries, or problems with the electrical system can cause the motor to not be started even in a state of sufficient fuel.
Is it possible to start the automatic motor by pushing it?
On a manual motor, starting the motor by pushing or “kick start” is quite common. However, this is different from automatic motors. In automatic motors, the CVT transmission system does not require manual clutch operation, but an automatic system that regulates continuous gear shifts.
In other words, on automatic motors, if the electrical or ignition system has problems, such as a weak battery or a damaged spark plug, then the motor cannot be started just by pushing it. On an automatic motor that breaks down due to electrical or ignition problems, pushing the motor will not activate the ignition system or produce the electrical energy needed to start the engine. Therefore, this method will not be effective for turning on an automatic motor that has problems with the electricity section.
The solution to turn on the automatic motor that broke down
If the automatic motor breaks down, there are several steps that can be taken to try to turn it back on. If the cause is a weak battery, try using a jumper cable or start booster to start the motor. Connect a weak motorcycle battery with another motorcycle battery that is in good condition, or use a starter booster if no other motor can be used. Make sure the cable is properly attached and careful not to cause a short circuit.
In addition, if the motor breaks down due to ignition problems or other systems, you should take the motorbike to the nearest repair shop for inspection. The technician can inspect the electrical system, spark plugs, and other components to confirm the problem and fix it.
Conclusion
So, starting an automatic motor that breaks down in a pushed way will not be effective if the cause is related to electrical or ignition problems. The CVT system on the automatic motor cannot be activated in this way. Therefore, if your automatic motor breaks down, the first step is to check the condition of the battery and the ignition system.
Tips to prevent the motor battery from being damaged quickly
Some habits can make the motorcycle battery damaged quickly. An example is often starting the engine without paying attention to the condition of the battery, often filling gasoline to the brim, or often ignoring periodic maintenance. By maintaining cleanliness and routine maintenance, the motorcycle battery can last longer and reduce the risk of breaking down.
